Metal Corner Bead ye mun ye?

Nɛgɛbere nɛgɛma . ye jɔli ni finidoncogo nafama ye min bɛ kɛ ka kɛnɛma nɔngɔnw barika bonya ani ka u cogoya dilan jalenw ni plaster sigiyɔrɔw la. A dilannen don ni nɛgɛ ye min ka ɲi kosɛbɛ, aliminiyɔmu, walima nɛgɛ min tɛ sɔgɔ, nkɔni biɲɛw bɛ a to a dakunw ka jɛya, ka u tilennen to, ka sɔrɔ ka kogow laminiw lakana ka bɔ tiɲɛniw, chipping ani u doncogo la. Ni suguya 60 ni kɔ bɛ sɔrɔ sigicogo, dacogo, cogoya ani dakunw cogoya la, an ka nkɔni biɲɛw bɛ sigida ni jago porozɛw bɛɛ magow ɲɛ—a bɛ furaw di jalenw ma, siman dilanni, ani kɛnɛma plaster finiw. I bɛ ka kura jɔ wo, i bɛ ka fɛn kura jɔ , . Nkɔni biɲɛ . ye yɔrɔ fitinin ye min bɛ danfaraba don kogo laban cogoya la.

Matériel suganditaw ka ɲɛsin an ka . Nɛgɛbere nɛgɛma .:

· A bɛ kɛ ni nɛgɛ ye . – A bɛ muɲuli, nɔgɔ kɛlɛli, ani nɔ barikamaw lakanani di, o b’a kɛ sugandili ye min bɛ se ka da a kan kɔnɔna baara fanba la.

· Aluminiyɔmu . – A ka nɔgɔn ani a bɛ se ka sɔgɔ, aluminiyɔmu . Nkɔni biɲɛ . bɛ bɛn kɛrɛnkɛrɛnnenya la sigida ɲiginnenw walima sigida nɔgɔlenw ma, o bɛ a to a ka mɛn yɔrɔ min na ji ye haminanko ye.

· inox . – Sugandili ɲuman min bɛ kɛ fanga laban na ani sɔgɔli kuntaalajan na, o ka ɲi kosɛbɛ yɔrɔw la minnu bɛ taa yɔrɔ caman na, kɛnɛma baarakɛcogo, walima sigidaw minnu bɛ saniyacogo ɲuman de wajibiya.

Nɛgɛbere nɛgɛma . : Baarakɛcogo & ɲinini yɔrɔw .

Nkɔni biɲɛw . bɛ dabɔ kogo kɔnɔna ni kɛnɛma bɛɛ kama, kɛrɛnkɛrɛnnenya la, plastering ni surface waatiw la. U bɛ baara kɛ ni kuntilenna fila ye, n’o ye ka angles saniyalenw cogoya ani ka kogo jɔcogo sabati yɔrɔw la minnu ka dɔgɔ.

Aplikasi yɔrɔ minnu bɛ kɛ cogoya la, olu dɔw ye .:

o Da ni finɛtiri da wuli .

o Kogow dakunw .

o Kolonw ni pilatiriw .

o Plafond joints ani beams .

o kɛnɛma nkɔni minnu bɛ drywBɛɛ walima siman dilan .

Nkɔni biɲɛw . dɛmɛ don ka .:

§ Aw bɛ angle dafalenw dilan, dakunw bulama, walima finimugu tilennenw basigilenw.

§ Aw bɛ a bali ka a da kari, ka a tiɲɛ, walima ka a chipping kɛ waati kɔnɔ .

§ Aw bɛ dɔ fara waleyali Tel .iya kan ani ka dɔ bɔ baara seginni na .

§ Aw bɛ gafe tilennen dɔ di trowels ni taping knives ma plaster kɛli waati la .

Mun na aw bɛ baara kɛ ni . Nɛgɛbere nɛgɛma . Over plastic?

k’a sɔrɔ plastiki (PVC) nkɔni biɲɛw bɛ sɔrɔ , . Perles de corner métal . bɛ fisaya baarakɛlaw ka sigida fanba la. Plastiki biɲɛw bɛ se ka kari walima ka u tiɲɛ u sirili waati la ani ka u tanga kɛnɛma yɔrɔw ma dɔɔni. Perles de corner métal . Aw bɛ fanga fisaman di, ka a ɲɛfɔ ka ɲɛ, ani ka a sɔrɔ a bɛ mɛn sen na—ka u kɛ wajibi ye ka kɛ finidoncogo ɲuman ye. Nɛgɛ ka gɛlɛya bɛ sira tilennen dafalen sɔrɔ, min nafa ka bon kogow labɛnni na min tɛ fɛn tiɲɛ, a tɛ i n’a fɔ plastiki min bɛ se ka wuli ani ka kɛ sababu ye ka nkɔniw kɛ minnu bɛ wuli. Yɔrɔ minnu ka ca mɔgɔw fɛ walima yɔrɔ minnu na, u bɛ se ka nɔ bila yɔrɔ minnu na, olu nafa ka bon kosɛbɛ, nɛgɛ ye sugandili ye min tɛ se ka sɔsɔ.

Fɛnw ɲɛfɔcogo ɲɛfɔlenw .: Nɛgɛbere nɛgɛma .

an ka range ka . DrywBɛɛ Metal Corner . Beads dabɔra walasa ka iziniw ka wajibi gɛlɛnw dafa, ka fɛn caman kɛ ani ka baara kɛcogo ɲuman di jɔli cogoya caman na.

A instBɛɛation a . Nkɔni biɲɛ . ka ɲɛsin DrywBɛɛ ma .

instBɛɛation an . Kɛnɛma kɔnɔna biɲɛ . Tiɲɛ na, a nafa ka bon kosɛbɛ walasa ka se ka kogo finiw sɔrɔ minnu bɛ mɛn ani minnu bɛ mɔgɔ ɲɛnajɛ. Aw bɛ nin wale ninnu kɛ walasa ka baarakɛlaw ka jaabiw sɔrɔ.

Baarakɛminɛnw & Fɛnw mago bɛ .:

· Nkɔni biɲɛ . (Galvanized walima inox) .

· Tin snips .

· kaseti sumanikɛlan .

· Vis marifa walima drill .

· 1 1/2" walima 2" jalenw .

· DrywBɛɛ joli la .

· Jogindaw ka muru (6” ani 10” hakɛw) .

· Sandpaper (medium grit) .

A sigili fɛɛrɛw .:

1. Taabolo fɔlɔ : Aw bɛ biɲɛ tigɛ .

o Aw bɛ kɛnɛmafɛn kelen-kelen bɛɛ janya jateminɛ ni kaseti sumanikɛlan ye.

o Aw bɛ tintin snips kɛ ka tigɛ . Nkɔni biɲɛ . ka bonya—tigɛ ka bɔ fan fila bɛɛ la ani ka biɲɛ kɔrɔta cɛmancɛ la walasa k’a sɔgɔ ka saniya.

2. Taabolo 2: Aw bɛ nkɔni biɲɛ siri .

o Aw bɛ biɲɛ minɛ ka ɲɛ jalen na, ka a kuncɛ digi kosɛbɛ ni aw bolokɔni ye.

o Aw bɛ juruw boli ka tɛmɛ dingɛw kɔnɔ biɲɛ kɔnɔ 12-inch ni ɲɔgɔn cɛ kogo fila bɛɛ la. Aw bɛ a daminɛ sanfɛ ka baara kɛ ka jigin.

o Aw bɛ aw jija kuru kelen-kelen bɛɛ ka jigin dɔɔni duguma walasa ka degun fitinin dɔ lawuli jalen kogo la k’a sɔrɔ aw ma papiye sanfɛla tigɛ.

o Laadilikan: Aw bɛ aw yɛrɛ tanga juruw bilali ma ɲɔgɔn kɛrɛfɛ—aw bɛ u sɔgɔ walasa u ka minɛ ka ɲɛ. Aw bɛ joli-sira-funu kɛ ka a lajɛ ni biɲɛ bɛ kogo janya bɛɛ la.

3. Taabolo 3nan : Aw bɛ joli-sira-funu fɔlɔ kɛ .

o Ni aw bɛ baara kɛ ni 6-inch joint knife ye, aw bɛ set setting-type joint compound hakɛ caman kɛ biɲɛ fan fila bɛɛ la. Aw bɛ criss-cross strokes kɛ ka nɛgɛ yɔrɔw bɛɛ datugu ani ka a dawolow kɛ ka ɲɛ ka don jalen na.

o Aw bɛ a daminɛ a dakun kelen na ka baara kɛ ka taa a fɛ ka taa fan dɔ fɛ, ka nɛgɛ fan kelen lafiɲɛ . Nkɔni biɲɛ . ani tɔ kelen bɛ kɛ jalen kan.

o Aw bɛ bɔgɔ tɛmɛnen o tɛmɛnen bɔ k’a sɔrɔ aw bɛ muru in wuli ka bɔ a sanfɛ walasa ka se ka basikɛti kɛ nivo ye.

4. Taabolo 4: Aw bɛ nkɔni nɔgɔya .

o Aw bɛ to ka aw ka muru saniya walasa aw kana bɔgɔ jalenw sɔrɔ.

o Ni fini fɔlɔ dafara, aw bɛ nɛgɛ sanuman, tilennen dɔ boli ka jigin nkɔni bɛɛ la tɛmɛsira kelen kɔnɔ min bɛ to sen na walasa ka a sanfɛla kɛ kelen ye ani ka dakun kɔrɔtalenw bɔ.

o Aw bɛ baara kɛ ni Blade’s Edge ye walasa ka bɔgɔ camanba bɛɛ lajɛlen kɛ kogo da la.

o magali laban .: Sani aw ka a to a ka se ka a kɛ , aw bɛ a sɔgɔ ka taa sanfɛ . Nkɔni biɲɛ . Walasa ka bɔgɔmugu kɔrɔtalen fɛn o fɛn bɔ a la.

5. 5nan : Aw bɛ bɔgɔmugu filanan kɛ .

o Ni finimugu fɔlɔ jara ka ban (aw bɛ sɛbɛncogo lajɛ—waati jalenw bɛ ɲɔgɔn ta), aw bɛ yɔrɔ gɛlɛn o yɔrɔ gɛlɛn dɔw sɔgɔ nɔgɔya la.

o Aw bɛ baara kɛ ni joli-sira-funu ye min ka bon (10” walima 12”), o bɛ kɛ ni fɛn filanan ye min bɛ kɛ ka a ɲagami.

o Aw bɛ a kɛ ka a kɛ ka a kɛ ka a fara a kan ka a fara a kan ka a ɲagami kogo sanfɛla la. Aw bɛ baara kɛ ni yeelen ye, ka tansiyɔn to a la ani ka sɔgɔsɔgɔninjɛ kunbɛn walasa ka a kɛ cogo nɔgɔman na, hali ka ban.

o Aw bɛ nin finimugu in to a ka ja fo lɛri 12–24.

6. Taabolo 6nan : Sɔgɔsɔgɔ laban ni sandingɛ .

o O kɔ fɛ, a bɛ ja pewu, ka yɔrɔ in cɛncɛn dɔɔni dɔɔni ni cɛncɛn ye min bɛ kɛ ni fɛnɲɛnamafagalan ye. Aw bɛ aw sinsin kɛrɛnkɛrɛnnenya la kogow da la walasa ka pilatiri ɲagami ani ka aw tanga tigɛcogo ma min bɛ kɛ ni ja ye.

o Surface min dilannen don, o ka kan ka kɛ nivo ye, ka nɔgɔya, ani ka labɛn ka ja walima ka fini laban.

an ka fɛn dilanni taabolo . DrywBɛɛ Metal Corner . .

An ka cɛsiri ka ɲɛsin jogoɲumanya ma, o bɛ daminɛ ni fɛn dilanni taabolo ye min bɛ kɔlɔsi kosɛbɛ, k’a lajɛ . Nɛgɛbere nɛgɛma . A bɛ sariyaw dafa minnu ka bon kosɛbɛ, minnu bɛ se ka muɲu ani ka baara kɛcogo ɲuman sɔrɔ.

Fɛn minnu bɛ kɛ ka baara kɛ ni u ye .:

· Bobine minnu bɛ sɔrɔ galvanisé galvanisé (Z180-Z275, DX51D+Z) .

· Aluminiyɔmu aluminiyɔmuw (6063-T5) .

· Nɛgɛ min bɛ se ka sɔgɔ ni nɔgɔ ye (Aisi 304, AISI 316)

· Poliyetilɛni (ka ɲɛsin mesɛri dilancogo ma) .

Fɛn dilanni fɛɛrɛw & taabolo taabolo .:

1. 1. Fɛnw labɛnni .: Nɛgɛ, aliminiyɔmu walima nɛgɛ min tɛ sɔgɔ, olu ka bobine belebelew tɛ lamaga ani u bɛ tilennen tigitigi. O kɔfɛ, o fɛn bɛ balo ni otomatikiw dilanni siraw ye.

2. 2. Perforation & punch .: Punching machines avancés bɛ dingɛw cogoya kɛrɛnkɛrɛnnenw walima mesh designs expands dilan flanw kan. O perforations (jirisunw) nafa ka bon kosɛbɛ walasa ka joli-sira-funu-kɔnɔ-fɛnɲɛnɛma-minɛn (conde) bila ka don biɲɛ na, ka a to a ka nɔrɔ kosɛbɛ ani ka a bali ka kari.

3. 3. Roll forming .: O jirisunw bɛ balo ni fɛnw ye minnu bɛ kɛ ka fɛnw kɛ ka ɲɛ. Roller kelen-kelen bɛɛ bɛ nɛgɛ cogoya dɔɔnin dɔɔnin ka kɛ profile ɲininen ye, a kɛra 90 degree angle ye, a Round Corner Bead . (bullnose), walima flansɛba dilancogo. O nɛnɛ-sɛnɛcogo in bɛ kɛ sababu ye ka dimension (hakɛ) tiɲɛni ni fɛnw dafalen sabati.

4. 4. Tigɛ ka janya .: Ni profil (profil) in Dabɔra, automatique (otomatiki) sεgεsεgεli bε bεnkansεbεn in tigɛ ka Kɛ janya hakɛ ye (misali la, 2.4m, 3.0m). Ultrasonic sensors bɛ kɛ sababu ye ka fɛnw tiɲɛ minnu bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ ka fɛnw tiɲɛ.

5. 5. Datugulan & furakɛli (ni a bɛ se ka kɛ) .:

o Ni nɛgɛ galvanizelen don, mugu dacogo wɛrɛ bɛ se ka kɛ walasa ka sɔgɔli kɛ ka ɲɛ walima ka ɲɛnajɛ kɛ.

o Aluminiyɔmu biɲɛw ka Tel .i ka anodizɛli kɛ walasa ka dugukolo sanfɛla gɛlɛya ni a sɔgɔli lakanani ɲɛ.

o Inox biɲɛw bɛ kɛ passiwvated ye walasa ka u ka corrosion resistance bangenen bonya.

6. 6. Jogoɲumanya kɔlɔsili & sɛgɛsɛgɛli .: Batch kelen-kelen bɛɛ bɛ jogo sɛgɛsɛgɛli gɛlɛnw kɛ. O ye sɛgɛsɛgɛli yelen ye fiɲɛw kan, hakɛ tiɲɛni sumani (janya, bonya, angle), nɔrɔli sɛgɛsɛgɛliw kɛli finiw kan, ani fɛnw labɛncogo sɛgɛsɛgɛli. Sɛgɛsɛgɛliw bɛ se ka kɛ ni sɛgɛsɛgɛli ye min bɛ se ka kɛ ni fɛnw ye minnu bɛ se ka kɛ sababu ye ka fɛnw tiɲɛ.

7. 7. Paki & Labeling .: A bana Plastering Corner Bead . Fɛn minnu bɛ dilan, olu bɛ fara ɲɔgɔn kan, u bɛ kɛ pakew kɔnɔ ka ɲɛ, wa u sɛbɛnnen don ka jɛya ni fɛnw ye minnu bɛ se ka kɛ, u bɛ se ka taa ni u ye yɔrɔ la min bɛ se ka taa ni u ye cogo la min tɛ mɔgɔ tɔɔrɔ.

Kɔrɔbɔli sariyaw & seereyaw .:

An Perles de corner métal . bɛ dilan walasa ka bɛn diɲɛ kɔnɔ ani marabolow jɔcogo sariyaw ma ani sariyaw ma, i n’a fɔ .:

· ASTM C1047 .: Standard specification for accessoires pour gypsum wBɛɛboard ani gypsum veneer base.

· ASTM A653 .: Standard specification for steel sheet, zinc-coated (galvanized) walima zinc-iron Bɛɛoy-coated (Galvannealed) ni funteni-dip kɛcogo ye.

· BS EN 10346 .: Continuellement hot-dip coated steel flat Produits . for cold formation – technique delivery conditions (for galvanized steel).

· ISO 9001:2015 .: Quality Management System seereyaw an ka fɛn dilanni taabolo la.

· CE taamasiyɛn .: ka ɲɛsin fɛnw ma minnu bɛ tila Erɔpu sɔrɔko yɔrɔ kɔnɔ.

Baarakɛyɔrɔw ɲɛnamaya & Baarakɛyɔrɔw bɛ se ka kɛ .:

A sigilen don ka ɲɛ . Perles de corner métal . A bɛ se ka baara kɛ ka tɛmɛ san 20-50 kan, ka kɛɲɛ ni fɛnw ni sigida cogoyaw ye. U nafa ka bon kosɛbɛ san 2019 kɔnɔ.:

o Sigidaw jɔli (so kura jɔli ani u labɛnni) .

o Jagokɛyɔrɔw (biro, feerekɛyɔrɔw, jatigila)

o Kɛnɛyaso (dɔgɔtɔrɔsow, dɔgɔtɔrɔsow)

o Kalansow (lakɔlisow, iniwɛrisitew)

o Industriw ni forobacakɛda porozɛw .

nafa jɔnjɔnw an ka . Perles de corner métal .

· Structure barika bonya . – A bɛ nkɔni kɛnɛw lakana ani k’u barika bonya ka bɔ don o don sɛgɛnbaliya la ani kasaara la, ka kogo ɲɛnamaya janya kosɛbɛ.

· Finishes sharp . – A bɛ layini tilennenw ni yɔrɔw ɲɛfɔlenw sabati ni cɛsiri fitinin ye, ka kɛ ni ɲɛdɔnbaga, polisi ye ka kɛ kogo o kogo ye.

· Waati-kɔlɔsili . – A bɛ pilatirili nɔgɔya ani ka cɛncɛn dɔgɔya, ka kogo laban Tel .iya ani ka baara musakaw dɔgɔya.

· A bɛ se ka muɲu . – Nɛgɛ min bɛ se ka nɔgɔ, o bɛ baara kɛ waati jan kɔnɔ waati o waati, k’a ta sokɔnɔna nɔgɔlenw na ka taa a bila kɛnɛma gɛlɛnw na.

· A baara ka nɔgɔn . – Aw bɛ a sigi joona ni juruw walima nɛgɛw ye; Baarakɛminɛn kɛrɛnkɛrɛnnen si man kan ka tɛmɛ baarakɛminɛnw kan minnu bɛ kɛ ka ɲɛ.

· Aplikasi minnu bɛ se ka kɛ fɛn caman ye . – A bɛnnen don drywBɛɛ, siman render, lime plaster, ani fɛn wɛrɛw ma, ka fura bɛɛ lajɛlen di kogow sigicogo suguya caman ma.

· A musaka ka dɔgɔ . – A bɛ dɔ bɔ dilan ni ladonni musakabaw la boon ɲɛnamaya kɔnɔ ka da a kan a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka a ka fɛnw lakana.

Mun na an ye an ka . DrywBɛɛ Metal Corner . . Fɛnɲɛnɛmaw?

ni suguya 60 ni kɔ ye . Nkɔni biɲɛw . An ka gafesɛbɛn kɔnɔ, an bɛ fɛɛrɛw tigɛ ka kɛɲɛ ni poroze wajibiyalen bɛɛ ye, hali .:

· Nkɔni kinin fɛ . : Lakanali sariyalen, min bɛ kɛ ka ɲɛ, o bɛ kɛ kɛnɛma nɔngɔnw na minnu bɛ kɛ cogoya la.

· Nkɔni lamininenw . (bullnose profiles): Walasa ka ɲɛnajɛ kɛ, min ka nɔgɔn, min bɛ bi taw la, min bɛ dakunw dɔgɔya.

· Birge flange biyew . : A bɛ dɔ fara a yɔrɔ kan walasa ka nɔrɔ ɲɔgɔn na, a ka ɲi kosɛbɛ yɔrɔw la minnu tɛ bɛn walima minnu ka bon dɔɔnin.

· Arch beads . : Sugandili minnu bɛ se ka wuli ka bɔ ɲɔgɔn na kogow kan minnu bɛ kuru ani fɛn dilanni fɛnw.

· Angle biyew ni mesh flanges . : ka kilisi dafalen di ani ka kari bali yɔrɔw la minnu ka gɛlɛn kosɛbɛ.

· PVC-metal hybride sugandiliw . : ka fɛn fila bɛɛ la ɲuman fara ɲɔgɔn kan walasa ka baara kɛrɛnkɛrɛnnenw mago ɲɛ (ni ɲinini kɛra).

An bɛ dɛmɛ don bulk orders, OEM . services, customized packaging, ani Tel .iya la diɲɛ kɔnɔ. An ka fɛn dilannenw bɛ baara kɛ kosɛbɛ DrywBɛɛ baarakɛlaw fɛ, . Plastering Corner Bead . Baarakɛlaw, ani jɔli tɔnw Erɔpu jamanaw bɛɛ la, Ameriki Woroduguyanfan, Azi Saheli-Kɔrɔn, ani Moyen-Orient, o ye an ka jogo ɲuman ni an ka dannayako seereya ye.

Kunnafoni-falen-falenw ka hakilinaw & diɲɛ lakikaw .

An Nɛgɛbere nɛgɛma . a kɛra porozɛ ɲɛtaa jatebaliya ye, ka tanuli sɔrɔ baarakɛlaw fɛ a ka jogo ɲuman n’a ka baara nɔgɔya kosɔn.

Kalan: "The Grandeur Residences" (Apartman luxury)

"‘The Grandeur Residences’ porozɛ kama, an mago tun bɛ fura barikama na walasa ka se 5000 ni kɔ ma , minnu bɛ se ka kɛ 5000 ye . Kɛnɛma kɔnɔna biɲɛ . . A ye a ka baara kɛ ni nɛgɛ ye . Nɛgɛbere nɛgɛma . Ka bɔ [i ka sosiyete tɔgɔ] la, a ye tigitigiya ni a muɲuli danma di. InstBɛɛation (dadon) tun bɛ tilennen, wa a laban tun ye dafabaliya ye, a tun bɛ se ka ɲɛnamaya kɛcogo ɲuman sariyaw dafa. An ye weleli-seginw dɔgɔya nkɔni tiɲɛniw na, o min ye porozew nafa bonya kosɛbɛ."
— David Chen, Porozɛ ɲɛmɔgɔ, Jɛkuluba ka Jɛkulu .

Kunnafoni-cimago ka seereya .:

"An ye wuli ka taa [i ka sosiyete tɔgɔ] la . Round Corner Bead . An ka jagokɛyɔrɔ fitininw bɛɛ kama. Danfara min bɛ nɔw kɛlɛli la ni a bɛ tali kɛ PVC la, o ye su ni tile ye. An ka nkɔni bɛ jɔ sisan don o don sɛgɛn ni a tiɲɛni na ka ɲɛ kosɛbɛ, o bɛ na ni kiliyanw ye minnu nisɔndiyalen don kosɛbɛ ani minnu tɛ se ka baara kɛ ka ɲɛ. Fɛn min bɛ kɛ ka fɛn dilannenw cogoya, o fana bɛ kɛ ka fara ɲɔgɔn kan."
— Sarah Jones, ɲɛmɔgɔ min bɛ baara kɛ ni a ye, a bɛ baara kɛ ni a ye.

feerelikɛlaw ka ɲɔgɔn sanga: mun na an ka . Plastering Corner Bead . A bɛ bɔ kɛnɛ kan .

Ni aw bɛ fɛn dilanbaga dɔ sugandi ka . DrywBɛɛ Metal Corner . Fɛnɲɛnɛmaw, a nafa ka bon kosɛbɛ ka jateminɛ kɛ fɛn dilannen dɔrɔn kan, nka a bɛ kɛ ka fɛn dafalen di. An ka fɛnw ni baarakɛminɛnw bɛ ɲɔgɔn ta cogo min na .:

Ɲininkali minnu bɛ kɛ tuma caman na (FAQ .) .

J: Yala aw ka nɛgɛdaga biɲɛw bɛ se ka kɛ kɛnɛma baarakɛcogo la wa?

A: Ɔwɔ, kɛrɛnkɛrɛnnenya la an ka nɛgɛ ni aliminiyɔmu . Nkɔni biɲɛw . ye fɛn ɲumanw ye kɛnɛma ka a sababu kɛ u ka sɔgɔsɔgɔninjɛ kunbɛncogo ɲuman ye. Nɛgɛ galɔn bɛnnen don kɛnɛma yɔrɔw ma minnu datugulen don walima yɔrɔ minnu na fɛnw bɛ sɔrɔ u la tigitigi.

J: Metal corner bead tigɛcogo ɲuman ye mun ye ka saniya?

A: Tigɛ saniyalenw, tigitigiw kama, an b’a fɔ ko aw ka baara kɛ ni tintin snips ɲumanw ye. Ni aw bɛ tigɛ siɲɛ caman walima porozebaw la, kuran sɔgɔli walima tigɛlan min bɛ ni nɛgɛ tigɛlan ye, o bɛ se ka baara Tel .iya kosɛbɛ.

J: Yala i bɛ ladamu janya walima profile di komandibaw kama wa?

A: Tiɲɛ yɛrɛ la. An kɛrɛnkɛrɛnnen don OEM . baarakɛminɛnw na ani an bɛ se ka dilan . Plastering Corner Bead . ni ladamu janya, profiles, ani hali perforation patterns kɛrɛnkɛrɛnnenw ye walasa ka poroze kɛrɛnkɛrɛnnenw wajibiyalenw dafa bulk orders kama. Aw bɛ se ka kuma an ka feerekɛlaw fɛ walasa ka baro caman kɛ.

J: Ne bɛ se ka sugandili kɛ cogo di nɛgɛ galvanisé ni inox cɛ?

A: Galvanized steel ka ɲi kosɛbɛ sokɔnɔna ni fɛn bɛɛ jɔli la yɔrɔ min na musaka dɔgɔyali ani nɔgɔ lakanani ɲuman mago bɛ yen. Nɛgɛ min tɛ sɔgɔ, o bɛ fɔ sigidaw la minnu bɛ sɔgɔ kosɛbɛ (misali la, kɔgɔjida laminiw, kemikɛli yɔrɔw), yɔrɔ minnu bɛ taa yɔrɔ caman na, minnu bɛ muɲu kosɛbɛ, walima ka baara kɛ ni saniyako wajibiyalenw ye kosɛbɛ (misali la, dɔgɔtɔrɔsow, dumuniko).

komandi, jiginni & dɛmɛ .

An b' an jija ka ko kɛlen dɔ di min tɛ fɛn tiɲɛ ka bɔ ɲininkali la ka se a sigili ma aw ka . Kɛnɛma kɔnɔna biɲɛ . magow.

Lase waati .:

A ka c’a la, yamaruyaw bɛ ci ka kɛɲɛ ni sariya ye baarakɛdon 7-14 kɔnɔ, ka kɛɲɛ ni u hakɛ ni u taayɔrɔ ye. Tel .iya la, fɛnw cicogo suganditaw bɛ sɔrɔ Tel .iya la porozew kama. Ka kɛɲɛ ni ladamu walima caman komandi ye, ɲɛmɔgɔya waatiw bɛna di quotation baara senfɛ.

garanti .:

an ka . DrywBɛɛ Metal Corner . Fɛn minnu bɛ sɔrɔ, olu bɛ na ni san 5 garanti ye min bɛ kɛ ka ɲɛsin fɛn dilanni nafama ma. Nin garanti in bɛ fɛnw dafalen ni u ɲɛfɔli cogoya ɲɛfɔ cogo la min bɛ kɛ cogoya la ani baarakɛcogo la.

After-Sales bɛ dɛmɛ don .:

An ka dɛmɛjɛkulu kɛrɛnkɛrɛnnen bɛ yen walasa ka dɛmɛ don fɛɛrɛko ɲininkaliw la, ka sigida labɛnni ɲɛminɛ, ani ka haminanko o haminanko sɔrɔ sanni kɔfɛ. An bɛ sɛbɛnw ni dɔnnikɛlaw ka laadilikanw di walasa aw ka poroze ka ɲɛtaa sɔrɔ.

Faamaw ka sɔrɔyɔrɔw .

1. ASTM International. "ASTM C1047-19, Standard Specification for Accessoires for Gypsum WBɛɛboard ani Gypsum Veneer Base." www.astm.org

2. Gypsum ka tɔn. "GA-216-2021: Gypsum panel ka fɛnw kɛcogo n'u bancogo." www.gypsum.org .

3. ISO. "ISO 9001:2015 - jogoɲumanya ɲɛnabɔli siraw - wajibiyalenw." www.iso.org

4. Galvanizers ka tɔn. "Corosion protection par hot dip galvanizing." www.galvanizing.org.uk .